*캔틸레버 뷰어 하우스 [ OAB + ADI ] BF House

반응형


자연과 동조하는 또다른 방법 한가지.

다이나믹한 형태를 보여주는 하우스는 크게 두가지 측면에서 형성되었습니다.

경사지 아래로 내려다 보이는 17세기 중세시대의 역사적 공간의

투영과 경사지에 위치한 대지의 자연을 최소한으로 훼손으로 하우스를

구축하는 것 입니다. 그렇게 시작한 하우스는 가운데 중정을 둔 사각도넛형태의

볼륨으로 구체화 됩니다. 특히 경사지에 앉혀진 하우스는 자연과의 간섭을

최소한으로 하기 위하여 장스판 캔틸레버 스페이스로 구축되며 이것을 지지하는

사선 기둥으로 구조화 됩니다. 이러한 드라마틱한 볼륨의 전면 파사드로 유입되는

외부환경은 전면에 위치한 리빙스페이스를 거쳐 내부 중정에서 하모니를 이룹니다.


reviewed by SJ




This home is on a plot of 3,000sqm with a height of 25m, in a Castellón neighborhood that is only 50% constructed.  Looking at the plot, we see that it reflectsits seventeenth century history, which is when overpopulation forced the cultivation of all types of terrain, including those that are very steep, through a system of small terraces with walls made of local rock.  The later abandonment allowed the growth of trees, mainly pine and carob.  Our position towards the plot was that of absolute respect, so the construction method should also respect the land, thus us opting for a prefabricated building system that is deposited on the land practically without touching it, without cutting down trees, and taking advantage of existing terrace/garden areas, which were rebuilt in the damaged areas, with the same stone and same technique.  Part of the house – garage and auxiliary areas – is buried, allowing us to re-introduce native vegetation on the natural terrain.  This also allows the plot to be accessedon the upper levelby forklift from a ramp that enters the garage located 13ml under the access level that communicates with both of the home’s levels.




Architects: OAB + ADI
Location: Borriol, Castellón de la Plana,
Design Team: Carlos Ferrater, Xavier Martí, Carlos Escura, Carlos Martín
Project Year: 2011
Photographs: Joan Guillamat


All of this is hidden from view.  For construction, in trying to lessen the impact on the ground, we chose a metal structure fabricated in a workshop and transported to the site in large pieces that could be assembled on 3 metal, V-shaped pillars.  An existing stone terrace supports the back part of the structure.


This home looks as though suspended or in flight due to the dry construction materials used.  The façade, resulting in various layers, is finished on the outside with corrugated sheet metal, specially designed to prevent glare and heat, thanks to the shadows caused by the folds.  The great front opening is oriented towards magnificent views, and allows adequate sunlight in during the winter, but also protects from the sun in the summer.  The solar energy panels with heat pipe technology on the roof allow the home to guarantee that at almost any moment, there will always be hot water available for both domestic use and for under-floor heating. Air currents cross the patio, taking advantage of the different orientations, which permits reductions in air conditioning consumption, which, in any case, has been installed.


The intermediate courtyard allows access under the house, and at the same time, allows all the rooms to face the sun and the views.  The whole house revolves around this courtyard.  This is a house with a courtyard, but with different connotations since each room in the house can be seen from the courtyard’s central location, as well as the surrounding landscape, and since the courtyard is surrounded on four sides by the house, but is not enclosed by it due to the slope of the plot.  In the large front area, which houses the kitchen, living room and master bedroom, the construction system is evident since the pillars and roof structure, formed by metal brackets supporting a corrugated sheet over which the roof is built, can be seen.



from  archdaily


그리드형

댓글

Designed by JB FACTORY