the ‘trig’ lampshade has been produced by daniel hilldrup in collaboration with stratasys using their objet500 connex3 fused deposition modelling technology. influenced
by the works of antonio gaudi, the work features polygonal shapes of
the cyan, magenta, and yellow color palette (one of ten palettes
available) and is seen as the perfect vehicle to exhibit the connex3’s
multi-color and material capabilities. ‘the design embodies two key
elements that I continue to explore: the capture and development of
virtual forms evolving under physical forces at a key point in time and
the quantization of highly contoured forms to more primitive states.
trig has both of these elements at its core,’ hilldrup said.
at the beginning of the process, a base form was devised
ensuring that a two core flex cable, an E14 lampholder, and an E14 lamp
are able to comfortably fit within the inner volume. next,
liquid simulations were performed to populate the volume. at a chosen
point in time, the mesh was extracted from the simulation for use
upstream in the development process. the resulting form of the
triangular mesh was reduced in resolution and provided the basis for the
final faceted effect.
afterwards, the watertight mesh was modified to ensure that only a single layer of outward facing triangles remained. for
the organization of the 46 different colors and material identities, a
script was developed to randomly allocate each characteristic along the
surface. each face was then given a solid offset to provide
adequate thickness for the fused deposition modelling on the connex3.
additional scripting was necessary for the separating of the triangles
into sub-groups based on their material codes.
these files were imported into STL editing software where the validity of the mesh was checked and corrected in preparation for 3D print production. in the final stage, materials from stratasys’ multi-color palettes were applied to each of the sub-groups according to a specified sequence.
'사례 > 3D_prinTing' 카테고리의 다른 글
|*3d 프린팅 레고블록, A sandstone block built from lego, blending real objects with 3d prints (0)||2014.08.09|
|*3d웨이브 [ Sosanya ] 3D-weaving (0)||2014.08.02|
|*3d 프린팅 램프 daniel hilldrup 3D prints triangulated multi-colored lampshades (0)||2014.07.12|
|*코카콜라 리싸이클 3D 프린터 ekocycle cube by will.i.am + coca-cola 3D prints using recycled plastic bottles (0)||2014.07.04|
|Digital Grotesque – the new face of architecture. (0)||2014.06.28|
|*3d 포토, 순간을 기억하다 Party-Omote 3D Shashinkan (0)||2014.06.22|